Hi, I installed TU 5.0A today and discovered that one disk is not seen by the OS.
In consolemode a 'show device' shows:
>>>show dev
dka0.0.0.9.0 DKA0 RZ28D 0008
dka200.2.0.9.0 DKA200 SOLAIR SOLAIR-RAID 0131
dka400.4.0.9.0 DKA400 RRD45 1645
dkb100.1.0.11.0 DKB100 RZ28 D41C
dkb200.2.0.11.0 DKB200 RZ29L-AA LYG0
dkb300.3.0.11.0 DKB300 RZ28 D41C
dkb400.4.0.11.0 DKB400 RZ29B 0014
dkb500.5.0.11.0 DKB500 RZ28 442D
dva0.0.0.0.1 DVA0
mka500.5.0.9.0 MKA500 SONY SDX-500C 0107
mkc500.5.0.12.0 MKC500 SONY SDT-5000 3.26
mkc600.6.0.12.0 MKC600 DLT2000 8E01
ewa0.0.0.6.0 EWA0 00-00-F8-21-36-9B
ewb0.0.0.8.0 EWB0 00-00-F8-00-16-67
pka0.7.0.9.0 PKA0 SCSI Bus ID 7 5.57
pkb0.7.0.11.0 PKB0 SCSI Bus ID 7
pkc0.7.0.12.0 PKC0 SCSI Bus ID 7
>>>
Now the second device named 'SOLAIR SOLAIR-RAID' doesn't show up in /dev/disk
# file /dev/rdisk/*a
/dev/rdisk/cdrom0a: character special (19/34) SCSI #0 "RRD45" disk #1 (SCSI ID #4) (SCSI LUN #0)
/dev/rdisk/dsk0a: character special (19/18) SCSI #0 "RZ28D" disk #0 (SCSI ID #0) (SCSI LUN #0)
/dev/rdisk/dsk1a: character special (19/50) SCSI #1 "RZ28" disk #3 (SCSI ID #1) (SCSI LUN #0)
/dev/rdisk/dsk2a: character special (19/66) SCSI #1 "RZ29L-AA" disk #4 (SCSI ID #2) (SCSI LUN #0)
/dev/rdisk/dsk3a: character special (19/82) SCSI #1 "RZ28" disk #5 (SCSI ID #3) (SCSI LUN #0)
/dev/rdisk/dsk4a: character special (19/98) SCSI #1 "RZ29B" disk #6 (SCSI ID #4) (SCSI LUN #0)
/dev/rdisk/dsk5a: character special (19/114) SCSI #1 "RZ28" disk #7 (SCSI ID #5) (SCSI LUN #0)
/dev/rdisk/floppy0a: character special (19/2) FDI #0 "floppy" disk #0 3.5" 1.44MB HD
Can anyone explane what goes wrong and what to do about it?
Thanks,
Kees Bol
--
==================================================
Mailto:bol_at_axp1.iend.wau.nl (!! bol_at_a,x,p,one,...)
Dept. for Information Mgt. and Datacomm. (I&D)
Wageningen UR,
Dreijenplein 2, 6703 HB Wageningen, Netherlands
Phone:+31(0)317-484715 Fax:+31(0)317-485360
http://www.wau.nl
==================================================
Received on Mon Jul 24 2000 - 12:49:00 NZST