Hi,
I am trying to set-up a DS20 running DU5.0A to use an HP LaserJet 4500
across a TCP/IP network. I can get something to print out using a postscript
level 2 driver but the formatting is corrupt and I only get the first few
lines printed from the file, each moving further and further from the LHS
margin and until they disappear off the RHS of the paper. Am I using the
correct driver (there is no specific driver available via lprsetup or the HP
web site) or is the printcap file entry incorrect?
The printcap file is as follows:
lp|lp0|0:\
:af=/usr/adm/lpacct:\
:ct=tcp:\
:if=/usr/lbin/ps_level2of:\
:lf=/usr/adm/lp0err:\
:lp=:\
:mc#20:\
:mx#0:\
:of=/usr/lbin/ps_level2of:\
:pl#66:\
:pw#80:\
:rw:\
:sd=/usr/spool/lpd0:\
:rp=PORT1:\
:rm=printserver:\
:xf=/usr/lbin/xf:
Many thanks in advance for any assistance that you can render.
Regards,
Nick.
Nick Francis
Senior Quantitative Research Analyst
Global Advisors Limited
Tel: +44 20 7629 7447
Fax: +44 20 7629 0356
E-Fax: +44 20 7681 1115
Received on Tue Nov 21 2000 - 17:45:53 NZDT