Hi all,
We have DIGITAL Ultimate Workstation 533au2 with two processor
running DU-4.0D( (Rev. 878)
I was going thru the kernel logs and found the following errors
binary.errlog:Master cpu at slot 0.
binary.errlog:Master cpu at slot 0.
binary.errlog:Master cpu at slot 0.
binary.errlog:Master cpu at slot 0.
binary.errlog:Master cpu at slot 0.
binary.errlog:Master cpu at slot 0.
binary.errlog:WARNING: too many System corrected errors detected on cpu 0. Reporting suspended.
binary.errlog:Master cpu at slot 0.
binary.errlog:Master cpu at slot 0.
binary.errlog:Master cpu at slot 0.
binary.errlog:Master cpu at slot 0.
binary.errlog:Master cpu at slot 0.
binary.errlog:panic (cpu 1): Processor Machine Check
binary.errlog:Master cpu at slot 0.
messages:Sep 22 02:11:20 oryx vmunix: panic (cpu 1): Processor Machine Check
messages:Sep 22 02:11:21 oryx vmunix: Master cpu at slot 0.
The uerf says the following ..
********************************* ENTRY 34. *********************************
----- EVENT INFORMATION -----
EVENT CLASS ERROR EVENT
OS EVENT TYPE 302. PANIC
SEQUENCE NUMBER 3.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Fri Sep 22 02:07:28 2000
OCCURRED ON SYSTEM oryx
SYSTEM ID x00070016
SYSTYPE x00000000
PROCESSOR COUNT 2.
PROCESSOR WHO LOGGED x00000001
MESSAGE panic (cpu 1): Processor Machine Check
********************************* ENTRY 35. *********************************
----- EVENT INFORMATION -----
EVENT CLASS ERROR EVENT
OS EVENT TYPE 110. MACHINE STATE
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Fri Sep 22 02:11:20 2000
OCCURRED ON SYSTEM oryx
SYSTEM ID x00070016
SYSTYPE x00000000
SYSTEM STATE x0003 CONFIGURATION
********************************* ENTRY 36. *********************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 1.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Fri Sep 22 02:11:20 2000
OCCURRED ON SYSTEM oryx
SYSTEM ID x00070016
SYSTYPE x00000000
MESSAGE Alpha boot: available memory from
_0x21b0000 to 0x5fffa000
Digital UNIX V4.0D (Rev. 878); Wed
_Feb 23 18:29:16 MET 2000
physical memory = 1024.00 megabytes.
available memory = 990.29 megabytes.
using 975 buffers containing 7.61
_megabytes of memory
Master cpu at slot 0.
Firmware revision: 5.5
PALcode: Digital UNIX version 1.23
DIGITAL Ultimate Workstation 533au2
pci1 at mcbus0 slot 5
psiop0 at pci1 slot 1
Loading SIOP: script c0001d00, reg
_7feef00, data c000bc10
scsi0 at psiop0 slot 0
rz5 at scsi0 target 5 lun 0 (LID=0)
_(DEC RRD47 (C) DEC 1206)
isp0 at pci1 slot 2
isp0: QLOGIC ISP1040B/V2
isp0: Firmware revision 5.57 (loaded
_by console)
isp0: Fast RAM timing enabled.
scsi1 at isp0 slot 0
rz8 at scsi1 target 0 lun 0 (LID=1)
_(DEC RZ1CB-CA (C) DEC LYJ0)
_(Wide16)
rz9 at scsi1 target 1 lun 0 (LID=2)
_(DEC RZ1DF-CB (C) DEC 0372)
_(Wide16)
rz10 at scsi1 target 2 lun 0 (LID=3)
_(COMPAQ BB01811C9C 3B05)
_(Wide16)
rz11 at scsi1 target 3 lun 0 (LID=4)
_(COMPAQ BB01811C9C 3B05)
_(Wide16)
gpc0 at eisa0
pci0 at mcbus0 slot 4
eisa0 at pci0
ace0 at eisa0
ace1 at eisa0
lp0 at eisa0
fdi0 at eisa0
fd0 at fdi0 unit 0
tga0 at pci0 slot 2
tga0: depth 8, map size 2MB, 1280x1024
tga0: ZLXp2-E, Revision: 34
tu0: DECchip 21140: Revision: 2.2
tu0: auto negotiation capable device
tu0 at pci0 slot 3
tu0: DEC TULIP (10/100) Ethernet
_Interface, hardware address:
_00-00-F8-10-ED-4B
tu0: auto negotiation on: will
_advertise 100BaseTX (UTP) port: full
_duplex
Created FRU table binary error log
_packet
lvm0: configured.
lvm1: configured.
kernel console: ace0
dli: configured
###############################################################################
I have no Idea what this means .
The Machine has been running perfectly without any problems , ofcourse
without one CPU ..
I will summarise
Thanx in advance
yogesh
Received on Wed Nov 29 2000 - 17:17:23 NZDT