Silicon Graphics Octane ("SPEEDRACER") |
HOSTNAME | OCTOPUS |
SYSTEM CPU | MIPS R10000 @250 MHz |
CACHE (2nd, 1st D/I) |
1 MB, 32 KB / 32 KB |
RAM | 512 MB (Max.1536 MB) |
SYSTEM BUS WIDTH |
64 bit |
SCSI BUS | 2 x UW SCSI (40 MB/s) Qlogic QL1040B
chips |
OPTION BUS | 4 x XIO slots |
GRAPHICS | Solid Impact 24-plane 1280x1024 @76Hz |
DISPLAY |
Samsung SyncMaster 959NF
Monitor |
HARD DISK DRIVE | 73 GB Ultra160 SCSI 10K RPM Quantum Atlas |
CD-ROM DRIVE | 24x Teac UltraSCSI |
NETWORK | Onboard 10/100baseT |
AUDIO |
Onboard audio chip, 2 x 16-bit
analog stereo I/O, 2 x 24-bit AES-3id I/O and 8 x 24-bit ADAT optical
I/O |
OS | IRIX 6.5.24 |
YEAR | 1997 |
SPEED | about 300 VAX MIPS |
COMMENTS | IRIX on this machine is fast to use, even
the version mentioned above. The IRIX GUI is very pleasant and the
over-all
feeling is very positive. If you don't like CDE, this is the hardware
&
*NIX OS you should get! |
ESTIMATED PRICE '97 | $35,000 |
1 250 MHZ IP30 Processor CPU: MIPS R10000 Processor Chip Revision: 3.4 FPU: MIPS R10010 Floating Point Chip Revision: 0.0 Main memory size: 512 Mbytes Xbow ASIC: Revision 1.2 Instruction cache size: 32 Kbytes Data cache size: 32 Kbytes Secondary unified instruction/data cache size: 1 Mbyte Integral SCSI controller 0: Version QL1040B (rev. 2), single ended Disk drive: unit 1 on SCSI controller 0 Integral SCSI controller 1: Version QL1040B (rev. 2), single ended CDROM: unit 6 on SCSI controller 1 IOC3 serial port: tty1 IOC3 serial port: tty2 IOC3 parallel port: plp1 Graphics board: SI Integral Fast Ethernet: ef0, version 1, pci 2 Iris Audio Processor: version RAD revision 12.0, number 1 |
Back to My Hardware Collection.
Last updated: | 18-3-2007 |