Hello,
Can someone help define the steps I need to go through to configure a
newly installed DE500-BA network ethernet adapter. We want to bring our
Alpha 2100 server up to 100 Mbits. We are running DU 4.0D. The show
dev command sees the new adapter as ewb0.0.0.8.0 EWB0
08-00-2B-C5-06-B3.
I believe I need to do the following and I'm not sure what else:
1) >>> set ewb0_mode = Fast
2) In /etc/rc.config set 'speed 100' in the ifconfig_0 parameters:
IFCONFIG_0="138.127.99.16 netmask 255.255.255.0 speed 100"
3) Run ifconfig :
Do I use the same interface id as the previous network interface,
ln0, that was running at 10 Mbits ?
4) Run netsetup: What do I have to configure in netsetup besides the
(IP) address and the subnet mask ?
Any help will be greatly appreciated .
Thanks,
Alan Beardsley
Raytheon Electronic Systems
50 Apple Hill Drive
Tewksbury, MA 01876
Alan_G_Beardsley_at_res.raytheon.com
978-858-1897
Received on Tue Feb 08 2000 - 16:08:45 NZDT