 |
≫ |
|
|
|
HP TCP/IP Services for OpenVMS
HP TCP/IP Services for OpenVMS
インストレーション/ コンフィギュレーション・ガイド
付録 A
TCP/IP Services の新規のインストレーションとコンフィギュレーションの例
この付録では， TCP/IP Services 製品を一度もインストールしたことがないシステムでの， TCP/IP Services のインストレーションとコンフィギュレーションの例を示します。
次の例は， TCP/IP Services のインストレーションでの対話のサンプルを示しています。この例では，インストレーションは，製品がまだインストールされていないシステムで行われています。 TCP/IP Services が以前にインストールされていたシスムでは，インストレーションでの対話がわずかに異なります ( 第 2 章 を参照)。
Choose one or more items from the menu separated by commas: 1
The following product has been selected:
DEC AXPVMS TCPIP V5.6-xx Layered Product
Do you want to continue? [YES] [Return]
Configuration phase starting ...
You will be asked to choose options, if any, for each selected product and for
any products that may be installed to satisfy software dependency requirements.
DEC AXPVMS TCPIP V5.6-xx: HP TCP/IP Services for OpenVMS.
Copyright 1976, 2006 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Development Company, L.P.
HP TCP/IP Services for OpenVMS offers several license options.
Do you want the defaults for all options? [YES] [Return]
Do you want to review the options? [NO] [Return]
Execution phase starting ...
The following product will be installed to destination:
DEC AXPVMS TCPIP V5.6-xx DISK$ALPHASYS:[VMS$COMMON.]
Portion done: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%
%PCSI-I-PRCOUTPUT, output from subprocess follows ...
% TCPIP-W-PCSI_INSTALL
% - Execute SYS$MANAGER:TCPIP$CONFIG.COM to proceed with configuration of
% HP TCP/IP Services.
%
Portion done: 100%
The following product has been installed:
DEC VAXVMS TCPIP V5.6-xx Layered Product
DEC VAXVMS TCPIP V5.6-xx: HP TCP/IP Services for OpenVMS.
Check the release notes for current status of the product.
$
|
次の例は， TCP/IP Services のコンフィギュレーションでの対話のサンプルを示しています。この例では，次の構成要素のコンフィギュレーションが行われます。
- コア環境
- TELNET クライアント
- FTP サーバ
この例では，コンフィギュレーションは，製品のコンフィギュレーションがまだ行われたことがないシステムで行われます。システムで以前に TCP/IP Services のコンフィギュレーションが行われたことがある場合，対話はわずかに異なります ( 第 3 章 を参照)。
HP TCP/IP Services for OpenVMS Configuration Menu
Configuration options:
1 - Core environment
2 - Client components
3 - Server components
4 - Optional components
5 - Shutdown HP TCP/IP Services for OpenVMS
6 - Startup HP TCP/IP Services for OpenVMS
7 - Run tests
A - Configure options 1 - 4
[E] - Exit configuration procedure
Enter configuration option: 1
HP TCP/IP Services for OpenVMS Core Environment Configuration Menu
Configuration options:
1 - Domain
2 - Interfaces
3 - Routing
4 - BIND Resolver
5 - Time Zone
A - Configure options 1 - 5
[E] - Exit menu
Enter configuration option: 1
HP TCP/IP Services for OpenVMS Core Environment Configuration Menu
Configuration options:
1 - Domain
2 - Interfaces
3 - Routing
4 - BIND Resolver
5 - Time Zone
A - Configure options 1 - 5
[E] - Exit menu
Enter configuration option: 1
DOMAIN Configuration
Enter Internet domain: yourdomain.com
HP TCP/IP Services for OpenVMS Core Environment Configuration Menu
Configuration options:
1 - Domain
2 - Interfaces
3 - Routing
4 - BIND Resolver
5 - Time Zone
A - Configure options 1 - 5
[E] - Exit menu
Enter configuration option: 2
HP TCP/IP Services for OpenVMS Interface & Address Configuration Menu
Hostname Details: Configured=Not Configured, Active=Not Configured
Configuration options:
1 - WE0 Menu (EWA0: TwistedPair 100mbps)
2 - IE0 Menu (EIA0: TwistedPair 100mbps)
3 - IE1 Menu (EIB0: TwistedPair 100mbps)
[E] - Exit menu
Enter configuration option: 1
HP TCP/IP Services for OpenVMS Interface WE0 Configuration Menu
Configuration options:
1 - Add a primary address on WE0
2 - Add an alias address on WE0
3 - Enable DHCP client to manage address on WE0
[E] - Exit menu
Enter configuration option: 1
HP TCP/IP Services for OpenVMS Interface WE0 Configuration Menu
Configuration options:
1 - Add a primary address on WE0
2 - Add an alias address on WE0
3 - Enable DHCP client to manage address on WE0
[E] - Exit menu
Enter configuration option: 1
IPv4 Address may be entered with CIDR bits suffix.
E.g. For a 16-bit netmask enter 10.0.1.1/16
Enter IPv4 Address []: 10.0.1.1/16
Enter hostname []: yourmachine
Requested configuration:
Address : 10.0.1.1/16
Netmask : 255.255.0.0 (CIDR bits: 16)
Hostname : yourmachine
* Is this correct [YES]: [Return]
Added hostname yourmachine (10.0.1.1) to host database
NOTE:
The system hostname is not configured.
It will now be set to yourmachine (10.0.1.1).
This can be changed later via the Interface Configuration Menu.
Updated system hostname in configuration database
Added address WE0:10.0.1.1 to configuration database
HP TCP/IP Services for OpenVMS Interface & Address Configuration Menu
Hostname Details: Configured=yourmachine, Active=Not Configured
Configuration options:
1 - WE0 Menu (EWA0: TwistedPair 100mbps)
2 - 10.0.1.1/16 yourmachine Configured
3 - IE0 Menu (EIA0: TwistedPair 100mbps)
4 - IE1 Menu (EIB0: TwistedPair 100mbps)
[E] - Exit menu
Enter configuration option: [Return]
HP TCP/IP Services for OpenVMS Core Environment Configuration Menu
Configuration options:
1 - Domain
2 - Interfaces
3 - Routing
4 - BIND Resolver
5 - Time Zone
A - Configure options 1 - 5
[E] - Exit menu
Enter configuration option: 3
DYNAMIC ROUTING Configuration
Dynamic routing has not been configured.
You may configure dynamic ROUTED or GATED routing.
You cannot enable both at the same time. If you want
to change from one to the other, you must disable the
current routing first, then enable the desired routing.
If you enable dynamic ROUTED routing, this host will use the
Routing Information Protocol (RIP) - Version 1 to listen
for all dynamic routing information coming from other
hosts to update its internal routing tables.
It will also supply its own Internet addresses to
routing requests made from remote hosts.
If you enable dynamic GATED routing, you will be able to
configure this host to use any combination of the following
routing protocols to exchange dynamic routing information
with other hosts on the network:
Routing Information Protocol (RIP) - Version 1 & 2
Router Discovery Protocol (RDISC)
Open Shortest Path First (OSPF)
Exterior Gateway Protocol (EGP)
Border Gateway Protocol (BGP-4)
Static routes
* Do you want to configure dynamic ROUTED or GATED routing [NO]:
A default route has not been configured.
* Do you want to configure a default route [YES]:
Enter your Default Gateway host name or address: yourgateway.yourdomain.com
yourgateway.yourdomain.com is not in the local host database.
Enter Internet address for yourgateway.yourdomain.com: 10.0.2.1
HP TCP/IP Services for OpenVMS Core Environment Configuration Menu
Configuration options:
1 - Domain
2 - Interfaces
3 - Routing
4 - BIND Resolver
5 - Time Zone
A - Configure options 1 - 5
[E] - Exit menu
Enter configuration option: 4
BIND RESOLVER Configuration
A BIND resolver has not been configured.
HP TCP/IP Services for OpenVMS supports the Berkeley Internet Name
Domain (BIND) resolver. BIND is a network service that enables clients
to name resources or objects and share information with other objects
on the network.
Before configuring your system as a BIND resolver, you should
first be sure that there is at least one system on the network
configured as either a BIND primary or secondary server for
this domain.
You can specify a BIND server by its address or name;
however, if specified by name, an entry for it must
exist in the TCPIP$HOST database.
You will be asked one question for each server.
Press Return at the prompt to terminate the list.
Enter your BIND server name: yourserver
yourserver is not in the local host database.
Enter Internet address for yourserver: 10.0.2.2
Enter next BIND server name: [Return]
HP TCP/IP Services for OpenVMS Core Environment Configuration Menu
Configuration options:
1 - Domain
2 - Interfaces
3 - Routing
4 - BIND Resolver
5 - Time Zone
A - Configure options 1 - 5
[E] - Exit menu
HP TCP/IP Services for OpenVMS Configuration Menu
Configuration options:
1 - Core environment
2 - Client components
3 - Server components
4 - Optional components
5 - Shutdown HP TCP/IP Services for OpenVMS
6 - Startup HP TCP/IP Services for OpenVMS
7 - Run tests
A - Configure options 1 - 4
[E] - Exit configuration procedure
Enter configuration option: 2
HP TCP/IP Services for OpenVMS Client Components Configuration Menu
Configuration options:
1 - DHCP Client Disabled Stopped
2 - FTP Client Disabled Stopped
3 - NFS Client Disabled Stopped
4 - REXEC and RSH Disabled Stopped
5 - RLOGIN Disabled Stopped
6 - SMTP Disabled Stopped
7 - SSH Client Disabled Stopped
8 - TELNET Disabled Stopped
9 - TELNETSYM Disabled Stopped
A - Configure options 1 - 9
[E] - Exit menu
Enter configuration option: 8
TELNET Configuration
Service is defined in the SYSUAF.
Service is defined in the TCPIP$SERVICE database.
Service is not enabled.
Service is stopped.
TELNET configuration options:
1 - Enable service on this node
2 - Enable & Start service on this node
[E] - Exit TELNET configuration
Enter configuration option: 2
%TCPIP-I-INFO, image SYS$SYSTEM:TCPIP$TELNET.EXE installed
%TCPIP-I-INFO, logical names created
%TCPIP-I-INFO, service enabled
%TCPIP-S-STARTDONE, TCPIP$TELNET startup completed
Press <ENTER > key to continue ...
HP TCP/IP Services for OpenVMS Client Components Configuration Menu
Configuration options:
1 - DHCP Client Disabled Stopped
2 - FTP Client Disabled Stopped
3 - NFS Client Disabled Stopped
4 - REXEC and RSH Disabled Stopped
5 - RLOGIN Disabled Stopped
6 - SMTP Disabled Stopped
7 - SSH Client Disabled Stopped
8 - TELNET Enabled Started
9 - TELNETSYM Disabled Stopped
A - Configure options 1 - 9
[E] - Exit menu
Enter configuration option: [Return]
HP TCP/IP Services for OpenVMS Configuration Menu
Configuration options:
1 - Core environment
2 - Client components
3 - Server components
4 - Optional components
5 - Shutdown HP TCP/IP Services for OpenVMS
6 - Startup HP TCP/IP Services for OpenVMS
7 - Run tests
A - Configure options 1 - 4
[E] - Exit configuration procedure
Enter configuration option: 3
HP TCP/IP Services for OpenVMS Server Components Configuration Menu
Configuration options:
1 - BIND Disabled Stopped 12 - NTP Disabled Stopped
2 - BOOTP Disabled Stopped 13 - PC-NFS Disabled Stopped
3 - DHCP Disabled Stopped 14 - POP Disabled Stopped
4 - FINGER Disabled Stopped 15 - PORTMAPPER Disabled Stopped
5 - FTP Disabled Stopped 16 - RLOGIN Enabled Started
6 - IMAP Disabled Stopped 17 - RMT Disabled Stopped
7 - LBROKER Disabled Stopped 18 - SNMP Disabled Stopped
8 - LPR/LPD Disabled Stopped 19 - SSH Disabled Stopped
9 - METRIC Disabled Stopped 20 - TELNET Enabled Started
10 - NFS Disabled Stopped 21 - TFTP Disabled Stopped
11 - LOCKD/STATD Disabled Stopped 22 - XDM Disabled Stopped
A - Configure options 1 - 22
[E] - Exit menu
Enter configuration option: 5
FTP Configuration
Service is defined in the SYSUAF.
Service is defined in the TCPIP$SERVICE database.
Service is not enabled.
Service is stopped.
FTP configuration options:
1 - Enable service on this node
2 - Enable & Start service on this node
[E] - Exit FTP configuration
Enter configuration option: 2
%TCPIP-I-INFO, image SYS$SYSTEM:TCPIP$FTP_CHILD.EXE installed
%TCPIP-I-INFO, image SYS$SYSTEM:TCPIP$FTP_SERVER.EXE installed
%TCPIP-I-INFO, logical names created
%TCPIP-I-INFO, service enabled
%TCPIP-S-STARTDONE, TCPIP$FTP startup completed
Press <ENTER > key to continue ...
The FTP CLIENT is not enabled.
* Do you want to configure FTP CLIENT [NO]:
HP TCP/IP Services for OpenVMS Server Components Configuration Menu
Configuration options:
1 - BIND Disabled Stopped 12 - NTP Disabled Stopped
2 - BOOTP Disabled Stopped 13 - PC-NFS Disabled Stopped
3 - DHCP Disabled Stopped 14 - POP Disabled Stopped
4 - FINGER Disabled Stopped 15 - PORTMAPPER Disabled Stopped
5 - FTP Enabled Started 16 - RLOGIN Enabled Started
6 - IMAP Disabled Stopped 17 - RMT Disabled Stopped
7 - LBROKER Disabled Stopped 18 - SNMP Disabled Stopped
8 - LPR/LPD Disabled Stopped 19 - SSH Disabled Stopped
9 - METRIC Disabled Stopped 20 - TELNET Enabled Started
10 - NFS Disabled Stopped 21 - TFTP Disabled Stopped
11 - LOCKD/STATD Disabled Stopped 22 - XDM Disabled Stopped
A - Configure options 1 - 22
[E] - Exit menu
Enter configuration option: [Return]
HP TCP/IP Services for OpenVMS Configuration Menu
Configuration options:
1 - Core environment
2 - Client components
3 - Server components
4 - Optional components
5 - Shutdown HP TCP/IP Services for OpenVMS
6 - Startup HP TCP/IP Services for OpenVMS
7 - Run tests
A - Configure options 1 - 4
[E] - Exit configuration procedure
Enter configuration option: 6
Begin Startup...
%TCPIP-I-INFO, TCP/IP Services startup beginning at 22-JUN-2006 09:18:20.58
%TCPIP-I-NORMAL, timezone information verified
%RUN-S-PROC_ID, identification of created process is 00000896
%TCPIP-I-SETLOCAL, setting domain and/or local host
%TCPIP-I-STARTCOMM, starting communication
%TCPIP-I-SETPROTP, setting protocol parameters
%TCPIP-I-DEFINTE, defining interfaces
%TCPIP-I-STARTNAME, starting name service
%TCPIP-S-STARTDONE, TCP/IP Kernel startup completed
%TCPIP-I-NOSERVICES, no services configured for startup
%TCPIP-I-PROXYLOADED, loaded 0 NFS proxy records
%TCPIP-I-LOADSERV, loading TCPIP server proxy information
%TCPIP-I-SERVLOADED, auxiliary server loaded with 0 proxy records
-TCPIP-I-SERVSKIP, skipped 0 communication proxy records
-TCPIP-I-SERVTOTAL, total of 0 proxy records read
%TCPIP-S-STARTDONE, TCPIP$PROXY startup completed
%TCPIP-S-STARTDONE, TCP/IP Services startup completed at 22-JUN-2006 09:18:23.54
Startup request completed.
Press <ENTER > key to continue ...[Return]
HP TCP/IP Services for OpenVMS Configuration Menu
Configuration options:
1 - Core environment
2 - Client components
3 - Server components
4 - Optional components
5 - Shutdown HP TCP/IP Services for OpenVMS
6 - Startup HP TCP/IP Services for OpenVMS
7 - Run tests
A - Configure options 1 - 4
[E] - Exit configuration procedure
Enter configuration option: E
|
|
