HP OpenVMS Systems Documentation

OpenVMS System Management Utilities Reference Manual

Q
QBUS_MULT_INTR system parameter
QDSKINTERVAL system parameter
QDSKVOTES system parameter
QUANTUM system parameter
Quota file
creating
disabling
displaying
enabling
modifying
removing an entry #1
removing an entry #2
updating
R
RAD_SUPPORT system parameter
Range checking
disabling
enabling
/READ_CHECK qualifier
in Analyze/Disk_Structure utility
REALTIME_SPTS system parameter
REBOOT phase of AUTOGEN
Rebuilding configuration tables
on Alpha systems
RECALL command
in LATCP
RECNXINTERVAL system parameter
RECONFIGURE command
in POLYCENTER Software Installation utility
/RECORD qualifier
in Backup utility
in Monitor utility
Record types
in Monitor utility
Recording files
class types
in Monitor utility
class header
class prefix for component classes
class records
Compaq control records
data block
description
file header record
I/O class record
node transition record
RLOCK class record
RMS class record
RMS file record
SCS class record
system information record
Records
duplicating
/RECORD_ATTRIBUTES qualifier
in Analyze/Disk_Structure utility
Recovering lost files
REFRESH command
in LATCP
in Show Cluster utility
REGISTER PRODUCT command
in POLYCENTER Software Installation utility
REGISTER VOLUME command
in POLYCENTER Software Installation utility
Release Notes
on software products
/RELEASE_TAPE qualifier
in Backup utility
RELOAD command
in SYSGEN
Remote nodes
creating MONITOR_SERVER process on
REMOVE CIRCUITS command
in Show Cluster utility
REMOVE CLUSTER command
in Show Cluster utility
REMOVE command
in Authorize utility
in Install utility
in POLYCENTER Software Installation utility
REMOVE CONNECTIONS command
in Show Cluster utility
REMOVE COUNTERS command
in Show Cluster utility
REMOVE CREDITS command
in Show Cluster utility
REMOVE ERRORS command
in Show Cluster utility
REMOVE (Field) command
in Show Cluster utility
REMOVE/IDENTIFIER command
in Authorize utility
REMOVE LOCAL_PORTS command
in Show Cluster utility
REMOVE MEMBERS command
in Show Cluster utility
REMOVE/PROXY command
in Authorize utility
REMOVE SYSTEMS command
in Show Cluster utility
Removing installed software products
RENAME command
in Authorize utility
RENAME/IDENTIFIER command
in Authorize utility
REPAIR command
in LMCP
/REPAIR qualifier
in Analyze/Disk_Structure utility
Repairing errors #1
Repairing errors #2
Repairing errors #3
Repairing errors #4
Repairing errors #5
REPLACE command
in Install utility
/REPLACE qualifier
in Backup utility
Report formats from Audit Analysis utility
brief
full
summary
Reporting errors
Reports
SHOW CLUSTER
command to modify
controlling displays #1
controlling displays #2
default display
formatting
organization of
printing
time period for #1
time period for #2
update interval #1
update interval #2
Requirements and limitations
in ANALYZE/DISK_STRUCTURE
RESALLOC system parameter
RESERVED_MEMORY ADD command
in SYSMAN
RESERVED_MEMORY FREE command
in SYSMAN
RESERVED_MEMORY MODIFY command
in SYSMAN
RESERVED_MEMORY REMOVE command
in SYSMAN
RESERVED_MEMORY SHOW command
in SYSMAN
RESHASHTBL system parameter
Resource accounting
programming information
Resource attributes #1
Resource attributes #2
Resource attributes #3
Resource use
producing reports of #1
producing reports of #2
producing reports of #3
Retransmit limit
REVOKE/IDENTIFIER command
in Authorize utility
/REWIND qualifier
as Backup utility input save-set qualifier
as Backup utility output save-set qualifier
Rights identifier
for disk quota file
RIGHTSLIST.DAT files
adding identifiers to
altering identifiers in
creating and maintaining #1
creating and maintaining #2
deleting identifiers from
displaying identifiers in
displaying records in
renaming identifiers
RJOBLIM system parameter
RMS statistics
in Monitor utility
RMS system parameters
RMS_DFMBC
RMS_DFMBFIDX
RMS_DFMBFREL
RMS_DFMBFSDK
RMS_DFMBFSMT
RMS_DFMBFSUR
RMS_DFNBC
RMS_EXTEND_SIZE
RMS_FILEPROT
RMS_PROLOGUE
RSRVPAGCNT system parameter
S
S0_PAGING system parameter
S2_SIZE system parameter
SAVE command
in Show Cluster utility
Save-set specification
Save sets
description of
directing output to
SAVEDUMP system parameter
/SAVE_SET qualifier
as Backup utility input save-set qualifier
as Backup utility output save-set qualifier
SAVPARAMS phase of AUTOGEN
SA_APP system parameter
SBIERRENABLE system parameter
SCA Control Program (SCACP)
commands
EXIT
HELP
SET CHANNEL
SET DEFAULT_PORT
SET LAN_DEVICE
SET TRACE
SET VC
SHOW CHANNEL
SHOW DEFAULT_PORT
SHOW LAN_DEVICE
SHOW TRACE
SHOW VC
SPAWN
START LAN_DEVICE
START TRACE
STOP LAN_DEVICE
STOP TRACE
event tracing
invoking
managing LAN cluster ports
overview
terminology
LAN clusters
SCA
SCA (System Communication Architecture)
in SCACP utility
SCACP
See SCA Control Program
Scheduling classes
creating
deleting
displaying
modifying characteristics
resuming suspended classes
suspending temporarily
SCH_CTLFLAGS system parameter
Screens
refreshing from LATCP
SCROLL command
in LATCP
in Show Cluster utility
SCROLL keypad function
SCS statistics
in Monitor utility
SCS (System Communications Services)
SHOW CLUSTER information
SCS system parameters
SCSBUFFCNT
SCSCONNCNT
SCSFLOWCUSH
SCSMAXDG
SCSMAXMSG
SCSNODE
SCSRESPCNT
SCSSYSTEMID
SCSSYSTEMIDH
SCSICLUSTER_P[1-4] system parameter
SCSI_NOAUTO system parameter
SCSSYSTEMID system parameter
and LATCP CREATE LINK command
Security alarm messages
specifying access criteria for
Security alarms
messages
specifying access criteria for
Security archive files, analyzing
Security audit data packets
fields
format
Security audit event messages
data packets in
event flags
extracting from log files
format
subtypes for events
types of events
Security audit header packets
Security audit log files
advancing to next record
analyzing #1
analyzing #2
data packet format
displaying records
displaying the full record
excluding information from reports
header packet format
opening new input file
resuming processing
returning to previous record
selecting records by event class
selecting records by time #1
selecting records by time #2
specifying duration of record display
writing alarm messages to
Security audit records
criteria for selecting
Security audit reports
advancing the display
binary output
brief format
creating
directing output
displaying selection criteria
duration of record display
excluding information
full format
interrupting the display
modifying selection criteria
processing additional log files
resuming the processing
summary of records
Security event classes
extracting audit records by
Security objects
classes
Security operators
sending alarm messages to audit log files
sending alarm messages to terminals
SECURITY_POLICY system parameter
SELECT command
in Show Cluster utility
/SELECT qualifier
in Backup utility
Service node
controlling access to #1
controlling access to #2
deleting a port
modifying characteristics of #1
modifying characteristics of #2
naming
service announcements #1
service announcements #2
Services
application #1
application #2
application #3
application #4
application #5
application #6
creating with LATCP
database #1
database #2
deleting with LATCP
displaying characteristics of
displaying counters
displaying information using LATCP
general timesharing
identifier #1
identifier #2
identifier #3
limiting size of node database #1
limiting size of node database #2
modifying characteristics of
naming with LATCP #1
naming with LATCP #2
rating #1
rating #2
rating #3
rating #4
responder
target
Session limit
Sessions
terminating
SET ACP command
in LANCP utility
SET AUDIT command
recording alarm messages
SET AUTO_POSITIONING command
in Show Cluster utility
SET command
(Field)
in Point-to-Point Protocol utility
in SYSGEN
SET DEFAULT command
in Monitor utility
SET DEVICE command
in LANCP utility
SET ENVIRONMENT command
in SYSMAN
SET FUNCTION command
in Show Cluster utility
SET INTERVAL command
in Show Cluster utility
SET LINK command
in LATCP
SET NODE command
in LANCP utility
in LATCP
SET/OUTPUT command
in SYSGEN
SET PORT command
in LATCP
SET PROFILE command
in SYSMAN
SET QUORUM command
avoiding use of /CLUSTER with SYSMAN DO command
SET SCREEN command
in Show Cluster utility
SET SECURITY command
/CLASS qualifier
specifying object class
SET SECURITY/EDIT command #1
SET SECURITY/EDIT command #2
SET SERVICE command
in LATCP
SET/STARTUP command
in SYSGEN
SET TIMEOUT command
in SYSMAN
SETPARAMS.DAT file #1
SETPARAMS.DAT file #2
SETPARAMS phase of AUTOGEN
SETTIME system parameter
Setting page, swap, and dump file sizes
Shadow sets
maximum number of
SHADOWING system parameter
SHADOW_MAX_COPY system parameter
SHADOW_MAX_UNIT system parameter
SHADOW_MBR_TMO system parameter
SHADOW_REMOVE_1 system parameter #1
SHADOW_REMOVE_1 system parameter #2
SHADOW_SYS_DISK system parameter
SHADOW_SYS_TMO system parameter
SHADOW_SYS_UNIT system parameter
SHADOW_SYS_WAIT system parameter
SHARE command
in SYSGEN
SHARE/INITIALIZE command
in SYSGEN
SHOW/ADAPTER command
in SYSGEN
SHOW/BUS command
in SYSGEN
SHOW CLUSTER command
in Show Cluster utility
initialization file
keypad commands
Show Cluster utility (SHOW CLUSTER)
activation time #1
activation time #2
activation time #3
activation time #4
classes of data
commands
continuous mode #1
continuous mode #2
controlling displays
data fields
defining arrow keys
defining keypad keys #1
defining keypad keys #2
deselecting window
directing output
Execute Procedure (@) command
exiting #1
exiting #2
invoking
keypad
moving display window #1
moving display window #2
/OUTPUT qualifier
panning display window
qualifiers
refreshing the display
removing display information
resetting display information
sample display
scrolling display window #1
scrolling display window #2
selecting display fields
CIRCUITS class
CLUSTER class
CONNECTIONS class
COUNTERS class
CREDITS class
ERRORS class
LOCAL_PORTS class
MEMBERS class
SYSTEMS class
selecting display window
SHOW command
in Audit Analysis utility
in Authorize utility
in CLUE
in Point-to-Point Protocol utility
SHOW CONFIGURATION command
in LANCP utility
SHOW/CONFIGURATION command
in SYSGEN
SHOW DEFAULT command
in Monitor utility
SHOW DEVICE command
in LANCP utility
SHOW/DEVICE command
in SYSGEN
SHOW DLL command
in LANCP utility
SHOW/DRIVER command
in SYSGEN
SHOW ENVIRONMENT command #1
SHOW ENVIRONMENT command #2
in SYSMAN
SHOW HISTORY command
in POLYCENTER Software Installation utility
SHOW/IDENTIFIER command
in Authorize utility
SHOW KEY command
in SYSMAN
SHOW LINK command
in LATCP
SHOW LOG command
in LANCP utility
in LMCP
SHOW NODE command
in LANCP utility
in LATCP
SHOW OBJECT command
in POLYCENTER Software Installation utility
SHOW [parameter] command
in SYSGEN
SHOW PORT command
in LATCP
SHOW PRODUCT command
in POLYCENTER Software Installation utility
SHOW PROFILE command
in SYSMAN
SHOW/PROXY command
in Authorize utility
SHOW QUEUE_ENTRY command
in LATCP
SHOW/RIGHTS command
in Authorize utility
SHOW SERVICE command
in LATCP
SHOW/STARTUP command
SHOW TIME command
in SYSMAN
SHOW TIMEOUT command
SHOW/TURBOCHANNEL command
in SYSGEN
SHOW/UNIBUS command
in SYSGEN
SHOW UTILITY command
in POLYCENTER Software Installation utility
SHOW_CLUSTER$INIT logical name
SHOW_CLUSTER$INIT:SHOW_CLUSTER.INI initialization file
SHUTDOWN NODE command
in SYSMAN
SHUTDOWN phase of AUTOGEN
/SINCE qualifier
in Backup utility
SMCI_FLAGS system parameter
SMCI_PORTS system parameter
SMP_CPUS system parameter
SMP_CPUSH system parameter
SMP_LNGSPINWAIT system parameter
SMP_SANITY_CNT system parameter
SMP_SPINWAIT system parameter
SMP_TICK_CNT system parameter
/SNAPSHOT qualifier
in Backup utility
Software
listing
POLYCENTER Software Installation utility
Software products
files of
extracting
removing
SPAWN command
and ATTACH command
in LANCP utility
in LATCP
in SYSMAN
SPTREQ system parameter
SSINHIBIT system parameter
Stage checks
Standalone BACKUP
Start phase of AUTOGEN
default
Startup
logging
phase
status
STARTUP ADD command
in SYSMAN
Startup command procedure #1
Startup command procedure #2
Startup command procedure #3
setting the name
site-independent file name
Startup database
establishing
files
adding
deleting
disabling
enabling
modifying
setting the default
STARTUP DISABLE command
in SYSMAN
STARTUP ENABLE command
in SYSMAN
STARTUP MODIFY command
in SYSMAN
STARTUP REMOVE command
in SYSMAN
STARTUP SET DATABASE command
in SYSMAN
STARTUP SET OPTIONS command
in SYSMAN
STARTUP SHOW command
in SYSMAN
STARTUP$STARTUP_LAYERED logical name
STARTUP$STARTUP_VMS logical name
STARTUP_Pn system parameters
in SYSMAN
STATES class record
in Monitor utility
Static service rating #1
Static service rating #2
displaying #1
displaying #2
Statistical information
about volume under verification
/STATISTICS qualifier
in Analyze/Disk_Structure utility
STATS.DAT file
created by ANALYZE/DISK_STRUCTURE/STATISTICS
Subprocesses
creating
from LATCP #1
from LATCP #2
with SPAWN command
with the LANCP SPAWN command
switching control of input stream to
Subsystem ACEs
example
specifying identifier characteristics
specifying identifiers
Subsystem attribute #1
Subsystem attribute #2
Subsystem attribute #3
Subsystems
controlling access to
/SUMMARY qualifier
in Monitor utility
Summary report
example
Swap files
changing size
displaying the size calculated by AUTOGEN
generating a new file sized by AUTOGEN
SWPALLOCINC system parameter
SWPFAIL system parameter
SWPFILCNT system parameter
SWPOUTPGCNT system parameter
SWPRATE system parameter
SWP_PRIO system parameter
Symbol table
command interpreter
Syntax
of BACKUP commands
SYS$SYSTEM:STARTUP.COM command procedure
SYSALF.DAT database in SYSMAN
SYSBOOT facility
using during bootstrap operations
SYSLOST.DIR file
SYSMANINI.INI file
changing file specification
SYSMWCNT system parameter
SYSPFC system parameter
SYSTEM class record
in Monitor utility
System Generation utility (SYSGEN)
assign parameter values
commands
AUTOCONFIGURE
CONFIGURE
CONNECT/ADAPTER
CREATE
DEINSTALL
DISABLE
ENABLE
INSTALL
LOAD
RELOAD
SET
SET/OUTPUT
SET/STARTUP
SHARE
SHARE/INITIALIZE
SHOW
SHOW/ADAPTER
SHOW/BUS
SHOW/CONFIGURATION
SHOW/DEVICE
SHOW/DRIVER
SHOW/STARTUP
SHOW/TURBOCHANNEL
SHOW/UNIBUS
TERMINAL
USE
WRITE
directing output #1
directing output #2
showing parameter values
specifying file output #1
specifying file output #2
work area #1
work area #2
work area #3
System loadable image
adding
removing
System management
clearing counters
creating disk quota files
defining target system
deleting device information #1
deleting device information #2
deleting node information #1
deleting node information #2
displaying LAN device parameters #1
displaying LAN device parameters #2
displaying node information #1
displaying node information #2
displaying OPCOM messages
displaying status and counters #1
displaying status and counters #2
displaying status and counters #3
displaying target environment
displaying user profile
displaying wait time for node response
invoking the LANCP utility
LANCP SPAWN command
limiting response time
MOP console carrier
MOP trigger boot
setting device information
setting wait time for node response
SYSMAN tasks
System Management utility (SYSMAN)
commands
ALF ADD
ALF REMOVE
ALF SHOW
ATTACH
CLASS_SCHEDULE
CONFIGURATION SET CLUSTER_AUTH
CONFIGURATION SET TIME
CONFIGURATION SHOW CLUSTER_AUTHORIZATION
CONFIGURATION SHOW TIME
DISKQUOTA ADD
DISKQUOTA CREATE
DISKQUOTA DELETE
DISKQUOTA DISABLE
DISKQUOTA ENABLE
DISKQUOTA MODIFY
DISKQUOTA REBUILD
DISKQUOTA REMOVE
DISKQUOTA SHOW
DO
EXIT
HELP
IO AUTOCONFIGURE
IO CONNECT
IO FIND_WWID
IO LOAD
IO REBUILD
IO REPLACE_WWID
IO SET PREFIX #1
IO SET PREFIX #2
IO SHOW BUS
IO SHOW DEVICE
IO SHOW EXCLUDE
IO SHOW PREFIX
LICENSE LOAD
LICENSE UNLOAD
PARAMETERS DISABLE CHECKS
PARAMETERS ENABLE CHECKS
PARAMETERS SET
PARAMETERS SHOW
PARAMETERS USE
PARAMETERS WRITE
RESERVED_MEMORY ADD
RESERVED_MEMORY FREE
RESERVED_MEMORY MODIFY
RESERVED_MEMORY SHOW
SCSI_PATH_VERIFY
SET ENVIRONMENT
SET PROFILE
SET TIMEOUT
SHOW ENVIRONMENT
SHOW KEY
SHOW PROFILE
SHOW TIME
SHUTDOWN NODE
SPAWN
STARTUP ADD
STARTUP DISABLE
STARTUP ENABLE
STARTUP MODIFY
STARTUP REMOVE
STARTUP SET DATABASE
STARTUP SET OPTIONS
STARTUP SHOW
SYS_LOADABLE ADD
SYS_LOADABLE REMOVE
common tasks
executing a command procedure
executing SYSMAN commands
exiting from
initialization file
invoking
overview
privilege requirements
restrictions
rights identifiers
System overview statistics
in Monitor utility
System parameters
ACP
affected by AUTOGEN calculations
affected by AUTOGEN feedback
categories
changing
recommended method
checking
checking AUTOGEN's settings
default parameter file #1
default parameter file #2
descriptions
disabling checking
displaying
device configuration
device driver addresses
I/O subsystems
parameter values
startup procedure
UNIBUS I/O addresses
values
Login security #1
Login security #2
modifying
recommended method
NPAGECALC
process limits and quotas
RMS #1
RMS #2
setting
parameter addresses
parameter values #1
parameter values #2
parameter values #3
parameter values #4
parameter values #5
recommended method
sharing multiport memory
showing
specifying startup procedure #1
specifying startup procedure #2
specifying startup procedure #3
summary #1
summary #2
System Communications Services
terminal behavior
VIRTUALPAGECNT #1
VIRTUALPAGECNT #2
VMS
work area #1
work area #2
writing contents of
writing to file
System passwords
System shutdown
to install changed system parameters #1
to install changed system parameters #2
System time
setting
SYSTEMS class
adding or restoring
fields belonging to
removing
SYSTEM_CHECK system parameter
SYSUAF logical name
defining
SYSUAFs (system user authorization files)
creating
default directory entry
default values
displaying records in
modifying
recreating
renaming records
SYS_LOADABLE ADD command
in SYSMAN
SYS_LOADABLE REMOVE command
in SYSMAN

Contents

Index