Hardware
 
  • SGI

  • SUN

  • digital

  • HP

  • x86

  • Misc
  •  
     
    SGI Workstations
      SGI IRIS
  • IRIS 3130


  • SGI Indigo
  • Indigo R4000

  • Indigo R3000

  • SNI Indigo


  • SGI Indigo²
  • Teal R4400

  • Purple R10K


  • SGI Indy
  • Indy R4600

  • Indy R5000PC

  • Indy R5000SC


  • SGI O2
  • O2 R5000


  • SGI Octane
  • Dual-R10K


  • SGI Personal Iris
  • P.I. 4D/25

  • P.I. 4D/35


  • SGI Onyx
  • Onyx RE2


  • SGI Origin
  • Origin 200
  •  
     
    Buying SGIs
      The Right System
  • Buying an Indigo
  • Buying an Indigo²
  • Buying an Indy
  • Buying an O2
  • Buying an Octane
  • SGI Vendors
  •  
     
    Tips and Tricks
     
  • Indigo Batterie
  • Upgrading an Indy
  • Octane LEDs
  • P.I. Keyboard
  • P.I. PSU
  • Illuminating an O2
  • Tuning an Indigo²
  •  
     
    IRIX Admin Guide
     
  • Installation
  • Networking
  • Administration
  • Printing
  • Magic Desktop
  •  
     

    Octane

    Hostname: octane   Hostaddress: 192.168.1.16
    Hardware: SGI Octane Dual R10K-195
    Software: IRIX 6.5
    Owned since: August 2002

    description hinv pictures links

     Description:
    System   SGI Octane   Drives   18GB Seagate ST318275LC
    Processor   2x R10000 at 195MHz   Graphics   MXI
    Memory   1024MB   Other   none

    This was my very first SGI system I owned. It already offered pretty much power and even had the TRAM modules for hardware accelerated texturing. Have a look at this page for general information on the SGI Octane.

     hinv Output:
    Octane 4% hinv -mv
    Location: /hw/node
                PM20 Board: barcode DFF712     part 030-0890-003 rev  D
    Location: /hw/node/xtalk/15
                IP30 Board: barcode GZB886     part 030-0887-004 rev  C
    Location: /hw/node/xtalk/15/pci/2
        PWR.SPPLY.S2 Board: barcode AAC8020372 part 060-0038-001 rev  D
                 FP1 Board: barcode DNS188     part 030-0891-003 rev  A
    Location: /hw/node/xtalk/12
                GM20 Board: barcode EAJ381     part 030-0957-003 rev  N
    2 195 MHZ IP30 Processors
    Heart ASIC: Revision E
    CPU: MIPS R10000 Processor Chip Revision: 2.7
    FPU: MIPS R10010 Floating Point Chip Revision: 0.0
    Main memory size: 1024 Mbytes
    Xbow ASIC: Revision 1.2
    Instruction cache size: 32 Kbytes
    Data cache size: 32 Kbytes
    Secondary unified instruction/data cache size: 1 Mbyte
    Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
      Disk drive: unit 1 on SCSI controller 0 (unit 1)
    Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
    IOC3 serial port: tty1
    IOC3 serial port: tty2
    IOC3 parallel port: plp1
    Graphics board: MXI
    Integral Fast Ethernet: ef0, version 1, pci 2
    Iris Audio Processor: version RAD revision 12.0, number 1
      PCI Adapter ID (vendor 4265, device 3) pci slot 2
      PCI Adapter ID (vendor 4215, device 4128) pci slot 0
      PCI Adapter ID (vendor 4215, device 4128) pci slot 1
      PCI Adapter ID (vendor 4265, device 5) pci slot 3
    
    
    Octane 5% /usr/gfx/gfxinfo
    Graphics board 0 is "IMPACTSR" graphics.
            Managed (":0.0") 1280x1024
            Product ID 0x3, 2 GEs, 2 REs, 4 TRAMs
            MGRAS revision 2, RA revision 0
            HQ rev B, GE11 rev B, RE4 rev C, PP1 rev A,
            VC3 rev A, CMAP rev E, Heart rev E
            19" monitor (id 0x1)
    
            Channel 0:
             Origin = (0,0)
             Video Output: 1280 pixels, 1024 lines, 72.24Hz (1280x1024_72)
    
     Pictures:

    The Mainboard with DualCPU

    Mainboard

    MXI Graphics Board
       
     Links:

    Downloads: