Hardware
 
  • SGI

  • SUN

  • digital

  • HP

  • x86

  • Misc
  •  
     
    SGI Workstations
      SGI IRIS
  • IRIS 3130


  • SGI Indigo
  • Indigo R4000

  • Indigo R3000

  • SNI Indigo


  • SGI Indigo²
  • Teal R4400

  • Purple R10K


  • SGI Indy
  • Indy R4600

  • Indy R5000PC

  • Indy R5000SC


  • SGI O2
  • O2 R5000


  • SGI Octane
  • Dual-R10K


  • SGI Personal Iris
  • P.I. 4D/25

  • P.I. 4D/35


  • SGI Onyx
  • Onyx RE2


  • SGI Origin
  • Origin 200
  •  
     
    Buying SGIs
      The Right System
  • Buying an Indigo
  • Buying an Indigo²
  • Buying an Indy
  • Buying an O2
  • Buying an Octane
  • SGI Vendors
  •  
     
    Tips and Tricks
     
  • Indigo Batterie
  • Upgrading an Indy
  • Octane LEDs
  • P.I. Keyboard
  • P.I. PSU
  • Illuminating an O2
  • Tuning an Indigo²
  •  
     
    IRIX Admin Guide
     
  • Installation
  • Networking
  • Administration
  • Printing
  • Magic Desktop
  •  
     

    SGI Personal Iris

    Hostname: kandinsky   Hostaddress: 192.168.1.25
    Hardware: SGI Personal Iris 4D/25
    Software: IRIX 4.0
    Owned since: 7. December 2002

    description hinv pictures links

     Description:
    System   SGI Personal Iris 4D/25   Drives   Tape Drive
    Processor   R3000 at 20MHz   Graphics   GR1.2
    Memory   12MB   Other   ?

    History of my System

    I just got it from ebay, but I still need to build an adaptor for connecting my Indigo keyboard to the Personal Iris.

    You can find some general ifnormation on the Personal Iris on this page.

     hinv Output:
    pia 2# hinv
    1 20 MHZ IP6 Processor
    FPU: MIPS R2010A/R3010 VLSI Floating Point Chip Revision: 2.0
    CPU: MIPS R2000A/R3000 Processor Chip Revision: 2.0
    On-board serial ports: 2
    Data cache size: 32 Kbytes
    Instruction cache size: 64 Kbytes
    Main memory size: 12 Mbytes
    Integral Ethernet: ec0, version 0
    Tape drive: unit 2 on SCSI controller 0: QIC 150
    Disk drive: unit 1 on SCSI controller 0
    Integral SCSI controller 0: Version WD33C93A
    Graphics board: GR1.2 Bit-plane, Z-buffer options installed
    
    pia 3# /usr/gfx/gfxinfo
    Graphics board 0 is "GR1" graphics.
            Managed (":0.0") 1280x1024
            24 bitplanes, 4 auxplanes, 4 widplanes, 24 zplanes, no turbo, RE2
            PIC revision unknown, single color cursor, board type GR1
     Pictures:
       
     Links: